Netgear M4500-48XF8C Switch L3 Managed 48 x 10 Gigabit SFP28 + 8 XSM4556-100EUS
Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies. Zero Touch AV over IP with pre-configured L2 Multicast on all models (10G AV encoders and decoders) and SDVoE-ready. Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite.
Optimized for "Spine and Leaf" redundant AV installations, with or without MLAG between spine switches. Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture. 2 power supply units (APS750W) and 6 redundant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy.
Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization. Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling. Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG). Comprehensive IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR, VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite.
Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 and IGMP Plus enhancement at the VLAN level. IGMP Plus enhanced implementation for automatic multicast across a L2 network igmp-plus.
High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol. Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP). Priority-Based Flow Control (PFC), DCBX Bridging, Enhanced Transmission Selection (ETS) and VXLAN Gateway for server installations. Two (2) redundant, modular power supplies are pre-installed contributing to business continuity management. Six (6) hot-swappable fan trays are pre-installed for 4+2 fan redundancy.
Spine and leaf architecture with every leaf switch (10G/25G access) connecting to every spine switch (distributed 100G core). Up to 48 paths ECMP routing for load balancing and redundancy. Link Dependency feature enables or disables ports based on the link state of different ports. Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation.
Service port for out-of-band 1 Gigabit Ethernet management (OOB). Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised). Non-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features. Industry standard command line interface (CLI) only.
The item "Netgear M4500-48XF8C Switch L3 Managed 48 x 10 Gigabit SFP28 + 8 XSM4556-100EUS" is in sale since Friday, January 3, 2020. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches".
The seller is "superman_123" and is located in Owings Mills, Maryland. This item can be shipped worldwide.
- Brand: NETGEAR
- RAID Levels: 1+0
- Interface: SFP
- Marca: Netgear
- Type: Ethernet Switch
- MPN: XSM4556-100EUS